|
|
|
|
|
|
|
|
 |
|
 |
|
 |
|
|
 |
|
 |
|
|
|
|
|
| High-Fidelity Ceiling Speaker |
|
|
HFCS1
|
•
|
Installs into a variety of ceiling environments including suspended and hard surface ceilings |
|
•
|
Large heavy-gauge plated steel back can for deep bass response |
|
•
|
Computer-matched dual venting system for full bass output |
|
•
|
Wide dispersion coaxial driver provides broad, even coverage |
| • |
Good off-axis response with smooth contouring |
| • |
For 16-ohm, 70V, & 100V systems |
| • |
Off-white finish |
| • |
Complies with UL-2043 - Report available |
|
|
|
|
|
|
High-Fidelity Ceiling Speaker
reduced back can depth |
HFCS1LP
|
•
|
6-3/4" mounting depth for installations into a variety of ceiling environments including suspended and hard surface ceilings |
|
•
|
Low-profile housing allows greater range of installation depths |
|
•
|
Computer-matched venting system for full bass output |
|
•
|
Wide dispersion coaxial driver provides broad, even coverage |
| • |
For 16-ohm, 70V, & 100V systems |
| • |
Off-white finish |
| • |
Complies with UL-2043 - Report available |
|
|
|
|
|
|
|
|
|
|
|
|
|
| High-Fidelity, Small-Footprint Ceiling Speaker |
|
|
HFSF1
|
•
|
Superior sound in a very compact enclosure (7-1/4" diameter) |
|
•
|
Wide-dispersion coaxial driver for broad, even coverage; superb off-axis response |
|
•
|
Only 6-1/4" diameter ceiling opening required |
|
•
|
Installs in a wide range of ceiling types |
| • |
For 70V and low-impedance systems |
| • |
Off-white paintable finish |
|
|
|
|
|
|
|
|
 |
|
|
|
| |
|
|
|
Drop-In Ceiling Speaker
with back can |
|
|
CSD1X2/U
|
•
|
Easy assembly saves installation time, effort, and cost |
|
•
|
1' x 2' perforated grille over entire front; off-white or bright white finish |
|
•
|
8" cone speaker with 10 oz. magnet and tweeter, and 25/70V transformer |
| • |
5 power taps (4W, 2W, 1W, 1/2W, & 1/4W); selectable by rotary switch |
| • |
Tile support rail (included) |
| • |
Complies with NFPA National Code 160b and UL-2043 - Report available |
|
|
|
|
|
|
Drop-In Ceiling Speaker
with back can |
CSD2X2/U
|
•
|
Easy assembly saves installation time, effort, and cost |
|
•
|
Tile support rail for 2' x 4' ceilings included |
|
•
|
2' x 2' perforated grille over entire front; off-white or bright white finish |
|
•
|
8" cone speaker with 10 oz. magnet and tweeter, and 25/70V transformer |
| • |
5 power taps (4W, 2W, 1W, 1/2W, & 1/4W); selectable by rotary switch |
| • |
Complies with NFPA National Code 160b and UL-2043 - Report available |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Drop-In Ceiling Speaker
with back can and recessed volume control |
|
|
CSD1X2VR/U
|
•
|
Recessed volume control accessible from front of grille |
|
•
|
Easy assembly saves installation time, effort, and cost |
|
•
|
1' x 2' perforated grille over entire front; off-white or bright white finish |
|
•
|
8" cone speaker with 10 oz. magnet and tweeter, and 25/70V transformer |
| • |
5 power taps (4W, 2W, 1W, 1/2W, & 1/4W); selectable by rotary switch |
| • |
Complies with NFPA National Code 160b and UL-2043 - Report available |
|
|
|
|
|
|
Drop-In Ceiling Speaker
with back can and recessed volume control |
CSD2X2VR/U
|
•
|
Recessed volume control accessible from front of grille |
|
•
|
Easy assembly saves installation time, effort, and cost |
|
•
|
Tile support rail for 2' x 4' ceilings included |
|
•
|
2' x 2' perforated grille over entire front; off-white or bright white finish |
|
•
|
8" cone speaker with 10 oz. magnet and tweeter, and 25/70V transformer |
| • |
5 power taps (4W, 2W, 1W, 1/2W, & 1/4W); selectable by rotary switch |
| • |
Complies with NFPA National Code 160b and UL-2043 - Report available |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Drop-In Ceiling Speaker
exposed driver without back can |
|
|
CSD1X2NB/U
|
•
|
Exposed driver |
|
•
|
Easy assembly saves installation time, effort, and cost |
|
•
|
1' x 2' perforated grille over entire front; off-white or bright white finish |
|
•
|
8" cone speaker with 6 oz. magnet and tweeter, and 25/70V transformer |
| • |
6 power taps (4W, 2W, 1W, 1/2W, 1/4W & 1/8W); selectable by stripped and tinned leads |
|
|
|
|
|
|
Drop-In Ceiling Speaker
exposed driver without back can; with recessed volume control |
CSD1X2NBVR/U
|
•
|
Exposed driver |
| • |
Recessed volume control accessible from front of grille |
|
•
|
Easy assembly saves installation time, effort, and cost |
|
•
|
1' x 2' perforated grille over entire front; off-white or bright white finish |
|
•
|
8" cone speaker with 6 oz. magnet and tweeter, and 25/70V transformer |
| • |
6 power taps (4W, 2W, 1W, 1/2W, 1/4W & 1/8W); selectable by stripped and tinned leads |
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
| Ceiling Speakers |
|
|
S86T725PG8U/W & S810T725PG8U/W Assemblies
|
•
|
4W capacity |
|
•
|
8" cone speaker for excellent audio quality |
|
•
|
6 power taps available (4W, 2W, 1W,
1/2W, 1/4W, 1/8W) |
|
•
|
Available with recessed or knob volume control |
| • |
Pre-assembled for faster installation |
| • |
Off-white or bright white enamel over steel grille |
| • |
For 70V & 25V systems |
|
|
|
|
|
|
Surface-Mount Speakers
Easy Install®/Easy Design Speakers |
SM1EZ, SM4T
|
•
|
Fast, easy, clean installation |
|
•
|
Direct and reflected sound paths create wide dispersion angle |
|
•
|
Lightweight and durable plastic shell with a paintable off-white finish |
| • |
Complies with NFPA National Code 160b and UL-2043 - Report available |
| • |
SM1EZ Design Information |
| • |
For 25V and 70V systems |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ceiling Speakers
Easy Design Speakers |
|
|
CS1EZ
|
•
|
1W, single-tap design |
|
•
|
Screw terminal connections for fast installation |
|
•
|
For 70V systems |
|
•
|
Pre-assembled with 8" cone speaker |
| • |
Heavy-duty, wire-wound volume control with knob |
| • |
Off-white enamel over steel grille |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
| Metal Box Speakers |
|
|
MB8TSQ & MB8TSL
|
•
|
Rugged all-steel surface-mounted enclosure; off-white finish |
|
•
|
Full range 8" cone speaker for excellent intelligibility |
|
•
|
Compatible with 25V or 70V amplifier systems |
|
•
|
Multiple taps at 4W, 2W, 1W, 1/2W, 1/4W, & 1/8W |
| • |
4-watt maximum power output |
| • |
Available as flat-fronted (MB8TSQ) or with 12.5° angled front (MB8TSL) |
|
|
|
|
|
|
Metal Box Speakers
with recessed volume control |
MB8TSQVR & MB8TSLVR
|
•
|
Recessed volume control |
|
•
|
Rugged all-steel surface-mounted enclosure; off-white finish |
|
•
|
Full range 8" cone speaker for excellent intelligibility |
|
•
|
Compatible with 25V or 70V amplifier systems |
|
•
|
Multiple taps at 4W, 2W, 1W, 1/2W, 1/4W, & 1/8W |
| • |
Available as flat-fronted (MB8TSQVR) or with 12.5° angled front (MB8TSLVR) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
Wall Baffle Speakers
|
|
|
WBS8T725 Assemblies,
& WBS810T725
|
•
|
4W capacity |
|
•
|
8" cone speaker for excellent audio quality |
|
•
|
6 power taps available (4W, 2W, 1W,
1/2W, 1/4W, 1/8W) |
|
•
|
Simulated walnut finish |
|
•
|
Available with volume control ("V" versions) |
|
•
|
Pre-assembled for faster installation |
| • |
Works with both 70V and 25V amplifier outputs |
|
|
|
|
|
|
|
Wall Baffle Speakers
Easy Design Speakers
|
WB1EZ
|
•
|
1W, single-tap design |
|
•
|
Screw terminal connections for fast installation |
|
•
|
For 70V systems |
|
•
|
Pre-assembled with 8" cone speaker |
|
•
|
Recessed volume control |
|
•
|
Simulated walnut finish |
|
|
|
|
|
|
|
|
|
|
|
|
|
Looking for something else?
|
|
|
|
|
| ©2004 Bogen Communications, Inc. Specifications subject to change without notice. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
